The Tractive X-TREME Shock for BMW F 800 GS is a 46 mm rear shock designed around a closed, pressurised damper architecture to keep damping consistent over varied conditions. The oil and gas are separated by an internal piston, helping maintain control as temperatures and load change. This model uses a remote reservoir mounted on a hose for flexible placement.

Design & features

  • Closed, pressurised shock design for consistent damping feel.
  • Oil/gas separation via internal separation piston.
  • Remote reservoir on a hose for packaging options.

Tuning Controls

  • Triple-adjustable damping: rebound, plus compression separated into high-speed and low-speed circuits.
  • Hydraulic preload adjuster for tool-free spring preload changes.

Base Setup (factory preset)

Supplied with Tractive’s baseline settings so you can install and ride, then fine-tune preload and damping to suit load, tyre choice, and riding conditions.

Before You Install

  • Confirm reservoir and adjuster routing/clearance before final tightening.
  • Set static and rider sag after installation, then fine-tune damping from there.

Serviceability/Lifecycle

The pressurised, piston-separated design is intended to be serviceable, supporting long-term ownership with periodic maintenance to refresh oil and seals.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM08-T5524-TR
Model # 46BM08-T5524-TR
Barcode # 46BM08T5524TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -25
Shock Length Eye to Eye (mm) 421.0
Spring Rate Standard 170 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 72.0
Notes PDSII anti-bottoming
Fitted Spring 170-180

More From This Category