The Tractive X-CITE shock for the Yamaha MT-07 is a closed, pressurised rear shock designed around a 46 mm architecture with oil and gas separated by an internal piston for consistent damping. It uses a sealed, self-contained construction to help maintain performance over longer service intervals and varied riding conditions. This model is configured with rebound damping adjustment.

Design & features

  • Closed, pressurised shock design to reduce aeration and support consistent damping
  • Oil/gas separation via an internal piston (not an emulsion layout)
  • Sealed shock construction intended for durability in day-to-day use

Tuning Controls

  • Rebound damping adjustment
  • No compression damping adjustment indicated for this configuration

Base Setup (factory preset)

Delivered with a factory baseline tune intended to suit general road use, with rebound adjustability available to fine-tune feel and control.

Who is this for?

  • Riders wanting a quality aftermarket rear shock solution for an MT-07 with straightforward rebound adjustment
  • Owners who prefer a closed, pressurised design with internal oil/gas separation

Before You Install

  • Confirm motorcycle model fitment for your specific Yamaha MT-07 variant and year
  • Check clearance around the shock and linkage during installation
  • Set sag and rebound to suit your weight and typical load before finalising settings

Serviceability/Lifecycle

As a sealed, pressurised unit with internal separation, this shock is designed with stable damping behaviour in mind. Routine inspection for leaks or damage and periodic servicing (as required by use and conditions) will help maintain performance over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46YA14-R3116-TR
Model # 46YA14-R3116-TR
Barcode # 46YA14R3116TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 310.0
Spring Rate Standard 95 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 56.0
Fitted Spring 95-145

More From This Category