KroozR WP AER 35mm Air Fork to Coil Spring Conversion Kit for
2017-on KTM 50SX & SX-E5
2017-on Husqvarna TC50
2020-on Gas Gas MC50

The Dual Spring Conversion Kit works in conjunction with the OEM WP AER35 - which has a single coil spring in the right hand side fork leg and an air fork setup in the left hand side.

It is designed to completely remove all the pneumatic system from your current left hand fork leg and replace it with a traditional coil spring and conventional damping cartridge setup in both legs.

Available with a single spring to match the stock rate for riders under 30kg.

The factory WP system is great for adjusting from soft to hard but simply has too much fork 'stiction' (due to the large air piston) giving poor performance for light weight 50 and 65cc racers. Our spring conversion makes the fork's action more linear and consistent plus eliminates the need to constantly check air pressure. It gives the 35mm fork the smooth operation needed for lighter riders - improving turns and tyre grip with less front end wash outs.

Parts included in the kit:

  • Air to Spring Conversion Hard Parts
  • Single Coil Spring (to suit factory spring in right hand fork leg)
  • Installation Instructions

Install Tools are required and available here:

Complete Tool Kit (All 3 tools)

Install Multi Tool 

35mm Tube Clamp

27mm Cartridge Clamp

Key Features:

  • Never have to set your air pressure ever again
  • Much more reliable fork
  • No fade out or pump up in pressure over long motos - highly noticable on these small machines. We are measuring 3-4psi over 20 minutes at a high level!
  • A constant feel in your front end that is more consistent throughout the ride
SKU KT-WPATS-AER35
Brand Krooztune
Shipping Weight 2.0000kg
Shipping Size 0.050 x 0.050 x 0.050m
Type Air to Spring
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Related products

More From This Category