The Ohlins FKR106 front fork cartridge kit is designed to improve front-end control and consistency for Yamaha YZF R6 riders. It focuses on delivering clearer feedback under braking and through mid-corner, with damping behaviour that remains predictable as conditions change. Adjustment is built in so you can tune feel and support to suit your riding.

Ohlins | Made to race, perfected to ride

Developed from Ohlins suspension know-how, this cartridge kit targets stability, communication and confidence at the front tyre. It is intended for riders who want a more composed fork response than standard internals can provide.

Who this cartridge kit is for

  • Yamaha YZF R6 riders chasing improved braking stability and mid-corner feel
  • Riders who want more precise damping control for road riding with occasional track use
  • Owners looking for a front end that stays consistent and communicative

Shock design & features

  • Front fork cartridge kit (FKR100 series, type code FKR106)
  • Premium internal components to support consistent damping performance
  • Engineered to improve composure and feedback at the front end

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment
  • Designed for straightforward setup changes to suit riding style and conditions

Before you install

  • Confirm compatibility with your exact Yamaha YZF R6 model and year before installation
  • Professional installation is recommended to ensure correct assembly and fork performance
  • Plan a setup check after fitting to align adjustments with your tyres, riding and usage

Need help choosing?

If you are comparing cartridge options or want guidance on setup goals for your YZF R6, contact Teknik Motorsport with your model details and riding use so we can point you in the right direction.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKR106
Model # TTX25S
Barcode # FKR106
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front cartridge
Type Code TTX25S
Stroke Metal to Metal (mm) 115.0
Product Family FKR 100
Notes Comes with 3 different spring rates: 9, 9.5 & 10N/mm (Not 2017 model)
Fitted Spring Sold separately. See notes.
Rec. Ohlins Oil 01309-

More From This Category