The Ohlins FGK208 NIX 30 fork cartridge kit is designed to improve front-end control for Suzuki GSX-R 600 and GSX-R 750 riders. It focuses on delivering more consistent damping and clearer feedback through the fork, particularly under braking and through corner entry. This kit provides separate adjusters for compression and rebound to help you tune feel and support to your riding.

Ohlins | Made to race, perfected to ride

Ohlins suspension components are developed to deliver predictable behaviour and confidence at the limit. The FGK208 NIX 30 cartridge is built to provide a composed, communicative front end with damping control you can tune to suit conditions.

Who this fork kit is for

  • GSX-R 600 and GSX-R 750 riders wanting improved braking stability and front-end feedback
  • Spirited street riding and occasional track use
  • Riders who prefer tunability rather than a fixed “one setting” feel

Shock design & features

  • NIX 30 cartridge design for refined damping characteristics
  • Premium internal components aimed at consistent performance and durability
  • Designed to enhance mid-corner feel and overall front-end composure

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment

Before you install

  • This is a front fork cartridge kit intended for fitment to Suzuki GSX-R 600 and GSX-R 750 models
  • Correct installation and setup are important to achieve the intended handling and feel

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGK208
Model # NIX 30
Barcode # FGK208
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 30
Fork Length (mm) 737.0
Stroke Metal to Metal (mm) 120.0
Product Family NIX 30
Notes 08790-xx series spring
Fitted Spring Sold separately. See notes.

More From This Category