The Ohlins FGK209 NIX 30 fork cartridge kit is designed to improve front-end control on the Triumph Daytona 675. It focuses on more consistent damping behaviour to support braking stability and clearer feel through the corner. The result is a more composed and communicative front end for both spirited road riding and track use.

Ohlins | Made to race, perfected to ride

Ohlins cartridge kits are built around proven damping architecture and quality internal components. The aim is repeatable performance with tuning range that lets you match the fork to your tyres, riding style and conditions.

Who this kit is for

  • Daytona 675 riders chasing improved front-end feedback and confidence
  • Riders who want better braking stability and mid-corner feel
  • Street riders who also do occasional track days and want adjustability to suit

Shock design & features

  • NIX 30 fork cartridge kit
  • Refined damping characteristics aimed at stability and control
  • Premium internal components for consistent operation

Tuning controls

  • Separate compression and rebound damping adjustments for fine-tuning
  • Adjustment range to suit road-focused setups with track capability

Before you install

  • Confirm model fitment for your Triumph Daytona 675 and your fork configuration before installation
  • Professional installation is recommended to ensure correct assembly and setup
  • Plan to set sag and damping after installation to suit your riding and tyres

Serviceability/lifecycle

Like any performance suspension component, the cartridge kit benefits from periodic servicing to maintain consistent damping and feel. Regular inspection and service intervals should reflect how hard and how often the bike is ridden.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGK209
Model # NIX 30
Barcode # FGK209
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 30
Fork Length (mm) 726.0
Stroke Metal to Metal (mm) 110.0
Product Family NIX 30
Notes 08790-xx series spring
Fitted Spring Sold separately, see notes.

More From This Category