The TracTive eX-CITE + HPA for the BMW F800GS is a closed, pressurised shock built around a sealed cartridge design to keep damping consistent over a wide range of conditions. This version is configured with a low ride-height option, reducing height by 45 mm. It is supplied with a hydraulic preload adjuster (HPA) for convenient spring preload changes without tools.

Design & features

  • Closed, pressurised construction to help maintain stable damping and reduce oil aeration.
  • Sealed cartridge architecture for consistent internal control and clean service practice.
  • Low ride-height configuration: 45 mm reduction.
  • Remote reservoir design.

Tuning Controls

  • Stepper-motor electronic adjustment integrated into the shock.
  • Hydraulic preload adjustment (HPA) for quick preload changes.

Who is this for?

  • BMW F800GS riders who want electronic damping control combined with easy, on-the-fly preload adjustment.
  • Riders seeking a lower ride height for reach and confidence at low speed.

Before You Install

  • Confirm the application is correct for your BMW F800GS model and year.
  • Account for the 45 mm ride-height reduction when setting up stance and ergonomics.
  • Ensure the motorcycle’s electronic system connections and routing suit the shock’s electronic adjuster and reservoir placement.

Serviceability/Lifecycle

  • Serviceable shock design; periodic maintenance helps keep performance consistent.
  • Keep the preload adjuster and electronic components clean and protected during washing and servicing.

Need Help Choosing?

  • If you’re unsure whether the low configuration or electronic control is the right match for your riding and load, provide your bike details and typical use case so the setup can be confirmed.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM08-S2536-TR
Model # Discontinued
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CITE + HPA
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -45
Shock Length Eye to Eye (mm) 414.0
Type Code eX-CITE
Stroke Metal to Metal (mm) 65.0

You May Also Like

More From This Category