The Tractive X-CITE rear shock for the BMW F 800 ST is a pressurised, oil/gas-separated damper with a remote reservoir, designed for stable damping control across changing conditions. It uses a sealed internal architecture to keep the damping circuit consistent and reduce aeration during extended use. This unit includes a spring and provides external adjustability to fine-tune feel and control.

Design & features

  • Pressurised, oil/gas-separated design with a remote reservoir to help maintain consistent damping
  • Sealed internal damping architecture to support long-term stability of the damping circuit
  • Supplied as a complete shock assembly with spring

Tuning Controls

  • Rebound damping adjustment
  • Hydraulic preload adjustment for quick ride-height and load changes

Base Setup (factory preset)

The shock is supplied with a baseline setting intended to suit typical road use. From that starting point, rebound damping and hydraulic preload can be adjusted to match rider load, luggage, and preference.

Before You Install

  • Confirm fitment for your BMW F 800 ST and check clearance for the remote reservoir and hose routing
  • Set sag and preload for your typical load before refining rebound damping
  • Inspect linkage and mounting hardware condition during installation

Serviceability/Lifecycle

As a pressurised, oil/gas-separated shock with a remote reservoir, this design is intended to be serviceable to maintain performance over time. Regular inspection and periodic servicing help keep damping consistent and protect internal seals and oil condition.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM06-R3115-TR-01
Model # 46BM06-R3115-TR-01
Barcode # 46BM06R3115TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 346.0
Spring Rate Standard 240 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 57.0
Fitted Spring 240-180

More From This Category