The Tractive X-CITE rear shock for the BMW G 650 GS X-Challenge uses a closed, pressurised damper design that keeps the oil and gas separated for consistent damping control. This model includes rebound adjustment to fine-tune how quickly the shock extends after a bump. Fitment is intended for the X-Challenge application listed in the product name.

Design & features

  • Pressurised shock design with oil/gas separation to reduce aeration and maintain damping consistency
  • Coil-spring rear shock assembly
  • Built for the BMW G 650 GS X-Challenge fitment noted

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

The shock is supplied with a baseline damping setting, with rebound adjustment available to tailor feel for load, terrain, and riding preference.

Before You Install

  • Confirm model compatibility for your BMW G 650 GS X-Challenge
  • Inspect existing mounting hardware and bearings/bushes and replace if worn
  • After installation, set sag and then fine-tune rebound to suit your typical riding conditions

Serviceability/Lifecycle

As a pressurised shock, correct servicing requires appropriate equipment and procedures. Plan periodic inspection and servicing based on use and operating conditions to keep damping performance consistent over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM07-R3555-TR
Model # 46BM07-R3555-TR
Barcode # 46BM07R3555TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 345.0
Spring Rate Standard 120 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 71.0
Fitted Spring 120-180

More From This Category