The Tractive X-CITE rear shock for the BMW F 900 GS uses a closed, pressurised damping architecture with oil and gas separated by an internal piston to maintain consistent damping and reduce aeration. It is a single-shock replacement designed for modern adventure use where control and stability matter across mixed surfaces. This model includes external rebound adjustment to fine-tune return speed to suit load and riding conditions.

Design & features

  • Closed, pressurised shock design with oil/gas separation via an internal piston
  • Built around a 46 mm shock body architecture
  • Intended as a complete rear shock unit for the BMW F 900 GS platform

Tuning Controls

  • Rebound damping: externally adjustable

Base Setup (factory preset)

The shock is supplied with a baseline damping setup intended to be ridden immediately, then refined using the rebound adjuster to match rider preference, tyres, and typical load.

Before You Install

  • Confirm model and fitment for your specific BMW F 900 GS variant and year
  • Check surrounding clearances and mounting hardware condition during installation
  • After installation, re-check fasteners and verify smooth suspension movement through the stroke

Serviceability/Lifecycle

As a pressurised, oil/gas-separated design, the shock is built for consistent damping performance over time and is intended to be serviceable as part of regular suspension maintenance.

Is It Right For You?

This option suits riders who want a robust, pressurised rear shock with straightforward rebound adjustment for tuning feel and stability. If you require additional adjustment functions beyond rebound, you will need a different configuration.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM24-R3555-TR
Model # 46BM24-R3555-TR
Barcode # 46BM24R3555TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 395.0
Spring Rate Standard 140 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 87
Fitted Spring 140-205

More From This Category