The TracTive X-CITE shock for the BMW F 650 GS Twin Cylinder is a closed, pressurised monotube design that keeps the oil and gas separated for more consistent damping over a wide range of conditions. The architecture is built around a sealed internal cartridge, helping maintain stable performance and reducing aeration under repeated movement. This unit is configured with external rebound adjustment to fine-tune ride control to your preference.

Design & features

  • Closed, pressurised shock design with separated oil and gas for consistent damping
  • Sealed internal cartridge construction for controlled fluid management
  • Built for direct-fit installation on the listed BMW model application

Tuning Controls

  • Rebound damping adjustment (external)
  • No compression or electronic adjustment is indicated for this configuration

Base Setup (factory preset)

Supplied with a factory baseline valving and setup intended to suit general road use on the BMW F 650 GS Twin Cylinder. Rebound adjustment allows you to refine the feel for load, tyres, and riding conditions without needing internal changes.

Who is this for?

  • Riders who want the ability to adjust rebound to better match their load and riding style
  • Owners seeking consistent damping from a closed, pressurised shock architecture

Before You Install

  • Confirm model fitment for your exact BMW F 650 GS Twin Cylinder variant before installation
  • Set sag and rebound after installation to suit rider weight and typical luggage/passenger use

Serviceability/Lifecycle

As a sealed, pressurised shock, periodic servicing helps maintain damping consistency over the long term. Service intervals depend on use conditions; heavier loads, rough roads, and frequent wet or dusty riding can shorten service life.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM08-R3312-TR
Model # 46BM08-R3312-TR
Barcode # 46BM08R3312TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 414.0
Spring Rate Standard 160 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 70.0
Fitted Spring 160-205

More From This Category