The TracTive X-CHANGE ESA2 front shock for the BMW R1200RT is a closed, pressurised shock assembly designed to integrate with the bike’s Dynamic ESA II system. It uses a sealed cartridge-style internal layout to keep damping consistent and reduce aeration under sustained use. This version is specified as a low (-25 mm) option, changing the bike’s front ride height accordingly.

Design & features

  • Closed, pressurised oil/gas design to help maintain consistent damping and reduce fade.
  • Sealed cartridge architecture for controlled fluid management and repeatable performance.
  • Front shock format intended for BMW R1200RT fitment with Dynamic ESA II compatibility.
  • Low-height configuration: -25 mm.

Tuning Controls

  • Electronic adjustment via the motorcycle’s Dynamic ESA II system (no manual clickers specified in the provided data).

Base Setup (factory preset)

Baseline damping and electronic control behaviour are configured to work with the Dynamic ESA II system. No additional factory setting values were provided.

Before You Install

  • Confirm your motorcycle is a BMW R1200RT equipped with Dynamic ESA II (ESA2) before ordering.
  • Account for the -25 mm front ride height change when considering side stand/centre stand geometry and overall chassis balance.

Serviceability/Lifecycle

As a sealed, pressurised unit, servicing should be carried out by a qualified suspension technician with the correct equipment for closed, gas-charged shocks.

Need Help Choosing?

If you are unsure about ESA2 compatibility or whether the -25 mm option is appropriate for your use, provide your bike model details and current ESA system type so the correct configuration can be confirmed.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM10-S1087-TR
Model # 46BM10-S1087-TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CHANGE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front
Damping Adjustment Type Electronic
Seat Height Change (mm) Lowered -25
Type Code X-CHANGE ESA

You May Also Like

More From This Category