The Tractive X-CITE shock for the BMW G 650 GS Sertao is a closed, pressurised rear shock designed around a sealed internal cartridge to maintain consistent damping over a wide range of conditions. Its oil and gas are separated by an internal piston, which helps reduce aeration compared with simpler designs. This model includes external rebound adjustment for fine tuning to load and riding style.

Design & features

  • Closed, pressurised construction with a sealed internal cartridge.
  • Oil/gas separation via an internal separation piston to help maintain damping consistency.
  • Single shock format supplied with spring.

Tuning Controls

  • Rebound damping adjustment.

Base Setup (factory preset)

The shock is supplied with a factory baseline setting intended as a starting point. Rebound adjustment is provided so you can tailor behaviour after installation based on preference and load.

Who is this for?

  • BMW G 650 GS Sertao riders who want a serviceable, pressurised shock with external rebound tuning.
  • Riders who regularly vary load (luggage/passenger) and want the ability to fine-tune feel without changing components.

Before You Install

  • Confirm application and fitment for your exact BMW G 650 GS Sertao.
  • Set sag and make rebound changes in small steps, testing between adjustments.

Serviceability/Lifecycle

This is a sealed, pressurised, oil/gas-separated shock designed to be maintained over its service life. Periodic servicing helps keep damping performance consistent as oil and seals age.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM12-R3531-TR
Model # 46BM12-R3531-TR
Barcode # 46BM12R3531TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -30
Shock Length Eye to Eye (mm) 321.0
Spring Rate Standard 160 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 52.0
Fitted Spring 160-180

More From This Category