The Tractive eX-PERIENCE Shock for the BMW R 1250 GS is a closed, pressurised monotube rear shock designed for consistent damping over long distances and changing conditions. Its separated oil and gas layout helps reduce fade and keeps response predictable on varied road surfaces. This unit includes a hydraulic spring preload adjuster for practical load changes. A remote reservoir is integrated to support stable performance.

Design & features

  • Closed, pressurised monotube construction with oil/gas separation for consistent damping
  • Remote reservoir design
  • Spring fitted with hydraulic preload adjustment for easier load and luggage changes

Tuning Controls

  • External rebound adjustment
  • Hydraulic spring preload adjustment

Base Setup (factory preset)

Delivered with a factory baseline intended as a practical starting point. Final setup should be matched to your riding weight, typical load, and terrain, then fine-tuned using the available adjusters.

Who is this for?

  • BMW R 1250 GS riders wanting controlled, consistent rear suspension behaviour for touring and mixed-surface riding
  • Riders who regularly vary load (luggage or passenger) and want quick preload changes
  • Those who prefer simple external tuning focused on rebound control

Before You Install

  • Confirm motorcycle fitment for your exact BMW R 1250 GS variant and year
  • Ensure there is suitable clearance and routing for the remote reservoir and hydraulic preload adjuster
  • Check spring rate suitability for your typical rider weight and load

Serviceability/Lifecycle

This is a serviceable, pressurised shock design intended to be maintained over its working life. Periodic servicing helps keep damping consistent and protects internal components.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM18-P4118-TR
Model # 46BM18-P4118-TR
Barcode # 46BM18P4118TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-PERIENCE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Electronic & Compression High + Low Speed
Seat Height Change (mm) Factory Lowered -25
Shock Length Eye to Eye (mm) 381.0
Spring Rate Standard 50 N/mm
Type Code eX-PERIENCE
Stroke Metal to Metal (mm) 92.0
Fitted Spring 50-205

You May Also Like

More From This Category