The Tractive eX-PERIENCE Shock for the BMW R 1200 GS Adventure is a replacement rear shock built around a closed, pressurised damping system for consistent control over long rides. The pressurised design helps reduce aeration in the oil during repeated impacts and extended heat cycles. This model includes a remote reservoir layout, with a spring fitted.

Design & features

  • Closed, pressurised damper design for more stable damping behaviour during sustained use
  • Remote reservoir configuration to manage oil volume and heat more effectively in demanding conditions
  • Supplied as a complete shock assembly with spring fitted

Tuning Controls

This shock includes damping adjustment. Use the adjuster to tailor the shock response to load, surface conditions, and riding pace.

Base Setup (factory preset)

Factory settings are intended as a workable starting point for general use. Final setup should be matched to your typical luggage/passenger load and preferred ride feel.

Before You Install

  • Confirm fitment for your exact BMW R 1200 GS Adventure variant and model year
  • Inspect mounting hardware and bushes during installation and replace any worn components
  • Set sag and then fine-tune damping after a short test ride

Serviceability/Lifecycle

As a pressurised shock with a reservoir, periodic servicing helps maintain damping consistency over time. Service intervals should be based on usage conditions and kilometres ridden.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM14-P4746-TR
Model # 46BM14-P4746-TR
Barcode # 46BM14P4746TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-PERIENCE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 410.0
Spring Rate Standard 160 N/mm
Type Code eX-PERIENCE
Stroke Metal to Metal (mm) 90.0
Fitted Spring 160-205

You May Also Like

Related products

More From This Category