The Tractive eX-CHANGE PRO Shock for the BMW R 1250 GS Adventure is a closed, pressurised shock built around a sealed internal cartridge to keep damping consistent over long rides. Its architecture separates the gas and oil with a floating piston rather than relying on an emulsion mix, which helps maintain stable feel as conditions change. This unit includes a remote reservoir, and it is supplied with a spring.

Design & features

  • Closed, pressurised design with oil and gas separated by an internal piston
  • Sealed cartridge-style damping assembly to support consistent performance and clean service work
  • Remote reservoir layout
  • Spring supplied

Tuning Controls

  • Electronically adjustable damping (configuration details depend on the motorcycle’s electronic system compatibility)

Base Setup (factory preset)

Delivered with a factory baseline tune intended as a starting point for the model application. Final setup should be confirmed after installation based on rider load, luggage, and typical terrain.

Before You Install

  • Confirm compatibility for your exact BMW R 1250 GS Adventure variant and any electronic suspension options fitted
  • Inspect mounting hardware and reservoir routing space before fitment
  • Plan for correct spring rate selection if your use case differs significantly from standard loading

Serviceability/Lifecycle

The sealed, pressurised construction is designed to be serviceable, with the separated gas/oil layout supporting consistent damping between services. Regular inspection for leaks, bushing wear, and reservoir line condition (where applicable) is recommended.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM18-P4117-TR-01
Model # 46BM18-P4117-TR-01
Barcode # 46BM18P4117TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CHANGE PRO
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic OEM to be re-used
Seat Height Change (mm) Lowered -50
Shock Length Eye to Eye (mm) 394.0
Spring Rate Standard 160 N/mm
Type Code eX-CHANGE PRO
Stroke Metal to Metal (mm) 76.0
Fitted Spring 160-180

You May Also Like

More From This Category