The Tractive X-TREME Shock for BMW F 750 GS is a 46 mm rear shock absorber built around a closed, pressurised oil/gas-separated design. This architecture helps maintain consistent damping and reduces aeration under demanding use. It features external adjustments for compression and rebound damping.

Design & features

  • Closed, pressurised shock design with oil/gas separation to support stable damping performance
  • Tractive X-TREME rear shock application for BMW F 750 GS
  • External reservoir configuration (as indicated by the model designation)

Tuning Controls

  • Compression damping adjustment
  • Rebound damping adjustment

Base Setup (factory preset)

This shock is supplied with a baseline damping and spring setup intended as a starting point. Final settings should be tailored to rider load, typical terrain, and riding style.

Who is this for?

  • Riders who want user-adjustable compression and rebound control for their BMW F 750 GS
  • Owners looking for a pressurised, oil/gas-separated shock architecture for consistent damping feel

Before You Install

  • Confirm model fitment for your BMW F 750 GS before installation
  • Set sag and damping with your normal riding load to establish a reliable starting point

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM18-T5502-TR
Model # 46BM18-T5502-TR
Barcode # 46BM18T5502TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -30
Shock Length Eye to Eye (mm) 371.0
Spring Rate Standard 150 N/mm
Spring Free Length (mm) 180
Type Code X-TREME
Stroke Metal to Metal (mm) 62.0
Notes PDSII anti-bottoming
Fitted Spring 150-180

More From This Category