The Tractive eX-CHANGE PRO Shock for BMW F 900 R is a replacement rear shock built around a closed, pressurised damper design that keeps the oil and gas managed for consistent performance. It uses a separated oil/gas layout to maintain damping control through changing temperatures and repeated use. Adjustment is provided for compression and rebound damping to help tailor feel to your load and riding conditions.

Design & features

  • Closed, pressurised shock construction for stable damping behaviour
  • Oil/gas separation via internal separation piston
  • Supplied as a sprung rear shock assembly

Tuning Controls

  • Compression damping adjustment
  • Rebound damping adjustment

Base Setup (factory preset)

The shock is delivered with a baseline setting intended to work as an initial starting point. From there, compression and rebound can be fine-tuned to suit your preferred ride quality, tyres, and typical load.

Before You Install

  • Confirm application for BMW F 900 R and check clearance around the shock body and any reservoirs
  • Set sag after installation and re-check fastener torque after the first ride
  • If you change typical load (luggage or pillion), plan to revisit your damping settings

Serviceability/Lifecycle

This is a rebuildable, pressurised shock designed to be serviced to maintain performance over time. Regular inspection for leaks, bushing wear, and consistent damping feel will help determine when servicing is due.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM20-P5146-TR
Model # 46BM20-P5146-TR
Barcode # 46BM20P5146TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CHANGE PRO
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic OEM to be re-used
Seat Height Change (mm) Factory Lowered -20
Shock Length Eye to Eye (mm) 383.0
Spring Rate Standard 170 N/mm
Type Code eX-CHANGE PRO
Stroke Metal to Metal (mm) 50.0
Notes PDSII anti-bottoming
Fitted Spring 170-160

You May Also Like

More From This Category