The Tractive X-CITE Shock for BMW R 1100 GS is a 46 mm rear shock built around a closed, pressurised oil/gas design to help maintain consistent damping and reduce aeration under sustained use. The internal separation piston keeps oil and gas separated for more stable behaviour as conditions change. This unit includes a spring and is designed as a direct-fit replacement for the standard rear shock.

Design & features

  • Closed, pressurised oil/gas shock construction
  • Separation piston to keep oil and gas apart for more consistent damping
  • 46 mm shock platform
  • Includes spring

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

Supplied with Tractive’s baseline internal valving and adjustment range intended to cover typical road and touring use on the BMW R 1100 GS. Final settings should be confirmed to suit rider load, luggage and tyre choice.

Who is this for?

  • Riders wanting a serviceable, pressurised rear shock with rebound adjustment
  • Owners who carry varying loads and want more control over rear-end behaviour via tuning
  • BMW R 1100 GS riders prioritising consistent damping feel over long rides

Before You Install

  • Confirm fitment for your BMW R 1100 GS and check for any model-year or build-variant differences before ordering
  • Inspect linkage and mounting hardware condition during installation
  • Set sag and rebound after installation to match rider weight and intended use

Serviceability/Lifecycle

This is a rebuildable shock architecture designed for periodic maintenance. Regular servicing helps maintain damping consistency, especially when used in harsh conditions or with frequent heavy loads.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM94-R3101-TR
Model # 46BM94-R3101-TR
Barcode # 46BM94R3101TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 382.0
Spring Rate Standard 140 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 68.0
Fitted Spring 140-205

More From This Category