The Tractive X-TREME Shock for the CFMOTO 450 MT is a closed, pressurised damper built around a sealed cartridge layout to keep damping consistent as conditions change. The internal gas pressure helps reduce aeration and fade during sustained use, supporting predictable behaviour over varied terrain. This unit is configured with multiple external damping adjustments for rider and load tuning.

Design & features

  • Closed, pressurised shock design to help maintain consistent damping and reduce cavitation
  • Sealed cartridge-style architecture for stable oil control and repeatable performance
  • External reservoir construction (fixed reservoir)
  • Supplied with spring

Tuning Controls

  • Triple-adjustable damping: rebound plus both low- and high-speed compression adjustment

Base Setup (factory preset)

Delivered with Tractive’s factory settings as a baseline. Fine-tuning is typically done after installation to suit rider weight, luggage and riding conditions.

Before You Install

  • Confirm compatibility with CFMOTO 450 MT model and year before fitting
  • Set sag and check clearance through full suspension travel after installation
  • If you change ride height or geometry during setup, re-check chain tension and handling balance

Serviceability/Lifecycle

As a pressurised, sealed shock, servicing should be carried out by a suspension specialist with the correct tools to manage pressure and restore oil and seals. Regular inspection for leaks and shaft condition helps maximise service life.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46CF24-T9101-TR
Model # 46CF24-T9101-TR
Barcode # 46CF24T9101TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Length Eye to Eye (mm) 350
Length Change (mm) Standard Height
Spring Rate Standard 95
Type Code X-TREME
Stroke Metal to Metal (mm) 87
Notes PDSII anti-bottoming
Fitted Spring :95-205

More From This Category