The Tractive X-TREME Shock for the CFMOTO 450 MT is a closed, pressurised 46 mm rear shock absorber designed to deliver consistent damping under a wide range of conditions. Its architecture separates gas and oil to reduce fade and maintain predictable response during prolonged use. This model uses an external reservoir layout to support stable damping behaviour. No ride height change information is provided in the input data.

Design & features

  • Closed, pressurised monotube design with separated gas and oil to improve consistency and reduce fade
  • External reservoir configuration to support damping stability during sustained operation
  • Built for the CFMOTO 450 MT fitment as listed

Tuning Controls

  • Triple adjustment: rebound damping, compression damping, and an additional compression circuit adjustment
  • Adjusters are manual (no electronic control is indicated in the input data)

Before You Install

  • Confirm compatibility with your exact CFMOTO 450 MT model and year before installation
  • After installation, set sag and adjust damping to suit load, tyres, and intended use
  • No factory preset details are provided in the input data

Serviceability/Lifecycle

  • Serviceable shock design intended to be maintained over time
  • Service intervals and rebuild details are not provided in the input data

Is It Right For You?

  • Suitable if you want broad tuning range with independent damping controls
  • A good match for riders who value consistent damping from a pressurised, separated gas/oil architecture

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46CF24-T9502-TR
Model # 46CF24-T9502-TR
Barcode # 46CF24T9502TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Shock Length Eye to Eye (mm) 358
Length Change (mm) Raised +25mm
Spring Rate Standard 95
Type Code X-TREME
Stroke Metal to Metal (mm) 90
Notes PDSII anti-bottoming
Fitted Spring :95-180

Related products

More From This Category