The Tractive X-TREME Shock for the Honda XL750 Transalp is a closed, pressurised shock absorber built around a sealed cartridge design for consistent damping control. Its architecture keeps the damping oil and gas separated and stable under changing conditions. This model includes a remote reservoir to support damping stability during sustained use. Adjustment controls are provided for preload, compression and rebound.

Design & features

  • Closed, pressurised design for consistent damping behaviour
  • Sealed cartridge architecture to help maintain damping stability over time
  • Remote reservoir layout to support oil/gas management during repeated use
  • Supplied as a sprung shock absorber

Tuning Controls

  • Rebound damping adjustment
  • Compression damping adjustment
  • Preload adjustment

Base Setup (factory preset)

The shock is supplied with Tractive’s baseline settings as delivered. Fine-tuning is typically done after installation to suit rider mass, luggage, passenger use and riding conditions.

Who is this for?

  • Honda XL750 Transalp owners wanting broad adjustability for mixed road and off-road use
  • Riders carrying variable loads who need preload and damping tuning range
  • Anyone prioritising a pressurised, sealed cartridge shock architecture for consistent performance

Before You Install

  • Confirm fitment for your exact Honda XL750 Transalp variant and year
  • Set sag and preload after installation before making damping changes
  • If you regularly change loads (luggage/passenger), note your settings so you can return to a known baseline

Serviceability/Lifecycle

This is a rebuildable, pressurised shock design intended to be serviced periodically to maintain performance. Regular servicing helps keep damping consistent and protects internal wear components.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO23-T5522-TR
Model # 46HO23-T5522-TR
Barcode # 46HO23T5522TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 347.0
Spring Rate Standard 100 N/mm
Spring Option -2 90-205
Spring Option Maximum 130-205
Spring Option +1 110-205
Spring Option -1 95-205
Spring Option +2 120-205
Damping Feature PDSII anti-bottoming
Damping System Separated oil/gas with reservoir
Rebound Adjuster Position 10 (270 deg)
Low-speed Compression Adjuster Position 10
High-speed Compression Adjuster Position 10
Spring Preload Setting 17 +8/-2
Preload Adjustment Hydraulic, with knob
Spring Type Linear, included
Piston Diameter (mm) 46
Suspension Unit Type Shock
Fitted Spring 100-205
Notes PDSII anti-bottoming
Stroke Metal to Metal (mm) 83.0
Type Code X-TREME

You May Also Like

Related products

More From This Category