The Tractive X-CITE shock for the Husqvarna Norden 901 is a closed, pressurised shock absorber designed around a sealed internal architecture to deliver consistent damping control over a wide range of conditions. This unit uses an oil/gas separation piston design rather than an emulsion layout, helping maintain more stable damping as temperatures and workloads change.

Design & features

  • Closed, pressurised construction for consistent damping behaviour
  • Oil/gas separated via an internal separation piston (not emulsion)
  • Single rear shock format for the Norden 901 application

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

It is supplied with a factory baseline tune intended to be a sensible starting point for general riding. Final settings should be dialled in to suit rider load, typical terrain, and preferred feel.

Before You Install

  • Confirm exact model fitment for your Norden 901 before installation
  • Plan to set sag and then fine-tune rebound to match your load and riding conditions
  • Installation should be completed by a qualified technician if you are not experienced with suspension work

Serviceability/Lifecycle

As a sealed, pressurised shock with separated oil and gas, correct servicing is important for long-term performance and reliability. Follow appropriate service intervals and use a suspension specialist familiar with pressurised shock assemblies.

Is It Right For You?

This shock suits Norden 901 riders who want straightforward tuning via rebound adjustment and the consistency benefits of a pressurised, oil/gas-separated design. If you need additional external damping adjustments beyond rebound, consider other configurations within the Tractive range.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HQ22-R3308-TR
Model # 46HQ22-R3308-TR
Barcode # 46HQ22R3308TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -35
Shock Length Eye to Eye (mm) 361.0
Spring Rate Standard 120 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 73.0
Fitted Spring 120-180

More From This Category