The TracTive Ducati DesertX Rear Shock X-TREME is a closed, pressurised rear shock built around a sealed cartridge design to keep damping consistent and reduce aeration under demanding use. It uses an oil/gas separation piston layout rather than an emulsion system. This model includes external reservoir packaging and is supplied with a spring.

Design & features

  • Closed, pressurised construction with a sealed cartridge for consistent damping feel.
  • Oil and gas are separated by an internal piston to reduce cavitation compared with emulsion designs.
  • External reservoir design to support stable damping behaviour during extended use.
  • Supplied with a spring.

Tuning Controls

  • Triple-adjustable damping: rebound plus both compression circuits (high-speed and low-speed).

Who is this for?

  • DesertX riders who want broader damping control for tailoring the bike to load, terrain, and riding style.
  • Riders who prioritise consistent performance from a pressurised, separated oil/gas shock layout.

Before You Install

  • Confirm the shock is the correct application for your Ducati DesertX and your intended setup.
  • After installation, set sag and verify clearance around the reservoir and hose routing.

Serviceability/Lifecycle

  • Designed as a serviceable shock; routine servicing helps maintain damping consistency over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46DU21-T5114-TR
Model # 46DU21-T5114-TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
Format Rear
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Seat Height Change (mm) Lowered -35
Shock Length Eye to Eye (mm) 338
Spring Rate Standard 85 N/mm
Spring Option -2 75-205
Spring Option Maximum 100-205
Spring Option +1 90-205
Spring Option -1 80-205
Spring Option +2 95-205
Manufacturer Note 1 Side and/or center stand might be too long
Damping Feature PDSII anti-bottoming
Damping System Separated oil/gas with reservoir
Rebound Adjuster Position 9 (180 deg)
Low-speed Compression Adjuster Position 12
High-speed Compression Adjuster Position 10
Spring Preload Setting 18
Preload Adjustment Mechanical
Spring Type Linear, included
Piston Diameter (mm) 46
Suspension Unit Type Shock
Fitted Spring 85-205
Notes PDSII anti-bottoming
Stroke Metal to Metal (mm) 84
Type Code X-TREME

More From This Category