The Tractive X-TREME rear shock for the KTM 790 ADVENTURE R is a closed, pressurised monotube design with an oil/gas separation piston to maintain consistent damping and reduce aeration. It includes a remote reservoir and a hydraulic preload adjuster for practical load and ride-height management. This version is raised by +20 mm.
Design & features
- Closed, pressurised monotube shock construction
- Oil/gas separated via an internal separation piston for more stable damping
- Remote reservoir to support consistent control under sustained use
- Hydraulic preload adjuster for convenient spring preload changes
- Ride height increase: +20 mm
Tuning Controls
- Triple-adjustable damping: rebound, compression and a separate high-/low-speed compression circuit
- Hydraulic spring preload adjustment
Who is this for?
- KTM 790 ADVENTURE R riders who want wide damping adjustability for varied surfaces and loads
- Riders carrying luggage or a passenger who value quick preload changes
- Owners looking to increase ride height by +20 mm
Before You Install
- Confirm the +20 mm height change suits your intended use and setup
- Allow for reservoir placement and hose routing during installation
- Set spring preload and damping to a known baseline before making changes
Serviceability/Lifecycle
- Pressurised, oil/gas-separated architecture is designed for consistent performance over time
- Periodic servicing helps maintain damping control and seal condition
Teknik Motorsport Pty Ltd Warranty terms for TracTive products.
This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.
Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.
Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.
 When a claim is made under the warranty, the following conditions have to be met:
- You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
- The product has to be installed and adjusted as described in the instructions
- The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
- Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
- The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
- A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
- Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
- Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
| SKU | 46KT19-T5342-TR |
| Model # | 46KT19-T5342-TR |
| Barcode # | 46KT19T5342TR |
| Brand | TracTive Suspension |
| Shipping Weight | 5.0000kg |
| Shipping Size | 0.200 x 0.200 x 0.400m |
| Unit Of Measure | ea |
| Type | X-TREME |
If your Motorcycle is listed below, this product will suit:
| Position (Front or Rear) | Rear |
| Damping Adjustment Type | Rebound & Compression High + Low Speed |
| Shock Options - Hydraulic Preload Adjuster | Hydraulic with knob |
| Shock Length Eye to Eye (mm) | 387 |
| Length Change (mm) | Raised +20mm |
| Spring Rate Standard | 95 N/mm |
| Type Code | X-TREME |
| Stroke Metal to Metal (mm) | 98 |
| Notes | PDSII anti-bottoming |
| Fitted Spring | 95-220 |
More From This Category
HiCalibre Fork Springs 43.8 x 460 Common Applicati
Proudly made in the USA(SKU: 19-197)
From
$245.00
48mm WP Stainless Steel Fork Seal Clip replaces W
fits all WP 48mm forks (SKU: 24-750-14)
$22.00
Techtool Fork Tube Tool & Cartridge Rod Holding Pl
For KYB, Showa & WP Twin or Open Chamber Forks(SKU: 93-032-00)
$220.00
HiCalibre Shock Spring 59 x 210 Common Fitment KTM
Proudly made in the USA(SKU: 20-049)
From
$345.00
KYB Suspension Tools Seal hammer 48mm
Original KYB Motorcycle Suspension Tool(SKU: 000.0673)
$128.81
Krooztune XPLOR Clamp Tool 6 and 12mm
Proudly made in Australia(SKU: KT-XPLORFF-TL)
$31.96
DRC Fork Seal Driver Set | Universal | 40-50mm
DRC Fork Seal Driver Tool Set(SKU: D59-26-005)
$177.09
Techtool Motorcycle Fork Seal Driver Kit 9pc Kit
35/36-39-41-43-45-46/47-48-49/50-54mm(SKU: 93-009-00)
$470.58
Kayaba (KYB) Genuine Parts Front Fork Service Kit
OEM KYB Japan Motorcycle Suspension Service Parts(SKU: 119994807001)
$175.32
Shock Seal Head Steel Bullet 4pc Kit
14x12 | 16x12 | 18x12 | 18x16 mm(SKU: 93-031-01)
$69.95
WP Reservoir Removal Tool - 2 Pin Type
Fits many WP Shocks from 1984 on(SKU: 93-046-00)
$55.00






