The Tractive X-TREME shock for the Honda CRF1000L Africa Twin is a closed, pressurised damper designed to provide consistent performance through a separated oil and gas layout. It uses a 46 mm shock body architecture with an external reservoir to help manage oil volume and temperature stability. This model is configured with a spring and a fixed hydraulic preload adjuster for convenient preload changes without tools.

Design & features

  • Closed, pressurised shock design with separated oil and gas to reduce aeration and maintain damping consistency.
  • External reservoir configuration to support stable damping behaviour over longer, rougher rides.
  • Supplied with spring.
  • Fixed hydraulic preload adjuster for easier preload changes.

Tuning Controls

  • Triple-adjustable damping: rebound adjustment plus high- and low-speed compression adjustment.
  • Preload adjustment via the hydraulic preload adjuster.

Base Setup (factory preset)

This shock is supplied with a baseline internal valving and adjustment range intended to be set up for your load and use case via spring preload and the external damping adjusters.

Who is this for?

  • Riders who want broad tuning range for varying loads and surfaces, including luggage or passenger use.
  • Owners who prefer the convenience of a hydraulic preload adjuster for regular preload changes.

Before You Install

  • Confirm compatibility with your exact CRF1000L variant and build date.
  • Plan to set sag and then fine-tune damping after installation.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO18-T5514-TR
Model # 46HO18-T5514-TR
Barcode # 46HO18T5514TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
Format Rear
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -25
Shock Length Eye to Eye (mm) 380.0
Spring Rate Standard 85 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 91.0
Notes PDSII anti-bottoming
Fitted Spring 85-205

More From This Category