The Tractive X-CITE shock for the Suzuki DL650A V-Strom is a closed, pressurised monotube rear shock built around a sealed cartridge architecture for consistent damping and reduced aeration under use. This model is configured with rebound adjustment to fine-tune chassis control for load, tyres, and road conditions. It’s designed as a complete replacement rear unit to suit the bike’s linkage and mounting points.

Design & features

  • Closed, pressurised monotube construction for stable damping performance
  • Sealed cartridge architecture to help manage oil control and minimise foaming
  • Built as a complete rear shock assembly for the application

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

The shock is supplied with a baseline damping setup intended as a starting point. Rebound adjustment lets you refine feel and control after installation based on load and riding conditions.

Who is this for?

  • Riders who want the ability to adjust rebound to suit different loads or riding pace
  • Owners looking for a pressurised shock design with consistent damping behaviour

Before You Install

  • Confirm model fitment for your exact DL650A V-Strom variant and year range
  • Inspect linkage bearings and mounting hardware condition during installation
  • Set sag and then use rebound adjustment to finalise control and comfort

Serviceability/Lifecycle

This is a serviceable, pressurised shock designed to be maintained over its working life. Periodic servicing helps keep damping performance consistent as oil and seals age.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46SU04-R3503-TR
Model # 46SU04-R3503-TR
Barcode # 46SU04R3503TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 341.0
Spring Rate Standard 90 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 77.0
Fitted Spring 90-180

More From This Category