2018 KTM 85 SFF WP AER 43 AIR TO SPRING CONVERSION KIT
The 2018 KTM/Husqvarna SFF WP AER 43 Air to spring conversion kit is aimed to suit all the current 2018 on Husqvarna and KTM 85 cc racers.
The Kroozetune WP43 SFF Air to spring conversion kit is a complete replacement cartridge assembly for your current WP AER43 AIR Fork setup. It is designed to completely remove all the Air system from your current WP43 Fork and replace it with a preload adjustable spring and cartridge setup. High Quality Springs are available to suit varying rider weights.
- Never have to set your air pressure ever again
- Super easy install. Undo top cap , drain oil completely and remove base bolt. Our kit slides in as a complete replacement supplied with spring installed all ready to go!
- Much more reliable fork
- No Fade out or pump up in pressure over long moto’s highly noticeable on these 85cc machines. We are measuring 3-4psi over 20 minutes at a high level!
- A Constant feel in your front end that is more consistent throughout the ride
- Spring Pre-load adjustable minimal tools are required for fitment. If you have the Fork cap and basic tools to remove the standard OEM Air cartridge you will have the ability to fit up our kit. Our cartridge kit is made from High grade 6061 Aircraft Grade Alloy , Chrome Moly rods and Anodised for a Factory Finish. Instruction manual included.
PARTS INCLUDED IN THE KIT
Fully Complete Cartridge assembly
Spring to suit this kit. SKU 38.5-580-
PLEASE ADVISE UPON ORDER OR LET US KNOW YOUR WEIGHT AND SPEED AND WE WILL RECOMMEND THE BEST SPRING FOR YOU.
SPRING RECOMMENDATIONS – GENERAL RIDING & MOTOCROSS APPLICATIONS
These recommendations are a guide only as fork Springs are weight and speed dependent. For example a 44 kg A GRADE ‘Pro level’ rider falls into the .65kg/mm category but may well be better suited to a 0.70kg spring due to the much higher corner entry speed and the ability to hit large bumps at high speeds. Please note this guide is for rider weight ‘without’ gear.
Please note we have had great results using one spring down for C level riders or absolute beginners on the 85cc machines. Eg. 42kg rider running a 0.60kg/mm spring for a plusher ride.
KTM 85 AIR TO SPRING FORK CONVERSION KIT
- Rider Weight 35-40kg – 0.60 kg/mm
- Rider Weight 40-45kg – 0.65 kg/mm
- Rider Weight 45-55kg – 0.70 kg/mm
- Rider Weight 55> kg – 0.75 kg/mm
For more accurate advice please consult your local suspension tech or send us an email.