The Ohlins BM050 STX 36 Supersport is a front mono shock developed to deliver controlled damping and clear chassis feedback on BMW roadsters. Built around Ohlins STX architecture, it is designed for consistent response through braking, turn-in and mid-corner support. This unit is intended as a direct-fit replacement for the BMW R 1150 R and R 850 R.

Ohlins | Made to race, perfected to ride

Ohlins suspension is engineered with a focus on damping control, stability and tuneability. The STX 36 Supersport family is designed to provide a broad, usable adjustment range for real-world road riding as well as more committed use.

Who this shock is for

  • Riders wanting improved front-end support and consistency from their BMW R 1150 R or R 850 R
  • Owners looking to refresh ageing suspension with a higher-quality damping package
  • Those who want external adjustability to tailor feel for different roads, loads or riding style

Shock design & features

This is an oil/gas separated, gas-pressurised shock design intended to maintain damping consistency during extended riding. It uses dedicated damping circuits to manage suspension movement in a controlled and predictable way.

Tuning controls

This unit provides external damping adjustment for both rebound and compression, allowing you to balance comfort, support and grip. Rebound adjustment helps manage how quickly the front returns after a bump or braking load, while compression adjustment influences resistance to dive and initial impact response.

Before you install

  • Confirm fitment for your exact model and year: BMW R 1150 R and BMW R 850 R
  • Inspect front suspension linkage/mounting hardware and replace worn bushes or bearings as needed
  • After installation, set sag and then fine-tune damping to suit tyres, load and road conditions

Serviceability/lifecycle

Ohlins shocks are designed to be maintained. Periodic servicing helps keep damping consistent and protects internal components, especially if the bike is used regularly or in harsh conditions.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU BM050
Model # S36DR1L
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.300 x 0.300 x 0.500m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front Mono
Shock Length Eye to Eye (mm) 334.0 +6/-4
Spring Rate Standard 57.0 N/mm
Type Code S36DR1L
Stroke Metal to Metal (mm) 73.0
Product Family STX 36 Supersport
Notes Front
Fitted Spring 00180-44
Spring Colour Yellow

More From This Category