The Ohlins STX 46 Adventure front shock for the BMW R 1200 GS Adventure is built to improve control and consistency when conditions and loads change. It is designed for adventure and touring use where stability, comfort and chassis support matter over long distances. The architecture uses a separated oil/gas design to help maintain damping performance on rough surfaces.

Ohlins | Made to race, perfected to ride

Developed from Ohlins racing and off-road experience, this unit is intended to deliver predictable front-end support and cleaner feedback. It is suited to mixed-surface riding where traction and stability are priorities.

Who this shock is for

  • BMW R 1200 GS Adventure riders who want more composed front suspension on uneven roads and tracks
  • Touring riders carrying luggage or frequently changing load
  • Adventure riders looking for stable steering feel and reduced front-end harshness over long days

Shock design & features

This is a front mono shock in the Ohlins STX 46 Adventure family, using a separated oil/gas layout for consistent damping control. It is engineered for durability and repeatability in harsh environments typical of adventure riding.

Tuning controls

External rebound damping adjustment is provided, allowing you to fine-tune how quickly the shock returns after compression. This helps you balance comfort, grip and steering stability to suit terrain and load.

Base setup (factory preset)

The shock is supplied with an Ohlins-fitted spring and a baseline setting established by Ohlins for the intended application. Fine-tuning is typically done by adjusting rebound damping to match riding style, load and surface conditions.

Before you install

  • Confirm fitment for BMW R 1200 GS Adventure (front position) before installation
  • Set sag and check clearances after installation, especially if load or accessories have changed
  • After initial rides, re-check settings and fasteners as part of normal workshop practice

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU BM607
Model # S46ER1
Barcode # BM607
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.300 x 0.300 x 0.500m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front Mono
Shock Length Eye to Eye (mm) 347.0
Spring Rate Standard 56.0 N/mm
Type Code S46ER1
Stroke Metal to Metal (mm) 95.0
Product Family STX 46 Adventure
Notes Front
Fitted Spring 01096-12
Spring Colour Yellow

More From This Category