The Ohlins FGK139 NIX 30 fork cartridge kit is a front suspension upgrade for the Triumph Daytona 675. It is designed to improve front-end control and consistency by refining the fork’s damping behaviour. With independent adjustment functions, it supports a more precise setup for your riding conditions.

Ohlins | Made to race, perfected to ride

Ohlins suspension components are developed with a focus on predictable feel and repeatable damping performance. This cartridge kit is intended to enhance front-end communication and stability under load, particularly during braking and corner entry.

Who this kit is for

  • Daytona 675 riders wanting stronger front-end feedback and control
  • Street riders looking for more confidence in braking and mid-corner stability
  • Riders who occasionally do track days and want wider tuning range

Shock design & features

  • NIX 30 fork cartridge kit
  • Premium internal components designed for consistent damping performance
  • Improves braking stability and mid-corner feel through refined damping characteristics

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment

Before you install

  • Confirm fitment for your exact Triumph Daytona 675 model and year before installation
  • Professional installation is recommended to ensure correct assembly and setup
  • After fitting, set sag and damping to suit your weight, tyres, and riding use

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGK139
Model # NIX 30
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate Standard 10.0 N/mm
Type Code NIX 30
Product Family NIX 30
Fitted Spring 04744-10

More From This Category