The Ohlins FKR102 (FKR 100) fork cartridge kit is designed to improve front-end control and feedback on Yamaha YZF R1 and YZF R6 models. It replaces the stock cartridge internals to deliver more consistent damping behaviour through braking and cornering. Adjustment is provided to help you tune the feel to your riding conditions and preferences.

Ohlins | Made to race, perfected to ride

Built around Ohlins cartridge technology, the FKR102 focuses on predictable support, clearer tyre contact feel, and stable behaviour when load transfers to the front end. It is intended for riders who want a more controlled, confidence-inspiring front suspension response without compromising consistency.

Who this kit is for

  • Yamaha YZF R1 and YZF R6 riders wanting improved front-end feedback
  • Road riders chasing better braking stability and mid-corner support
  • Track day riders looking for a more tunable front suspension setup

Shock design & features

  • Fork cartridge kit designed to refine damping characteristics and control
  • Premium internal components aimed at consistent performance and durability

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment

Before you install

  • Confirm compatibility with your exact Yamaha YZF R1 / YZF R6 model and year before fitting
  • Correct installation and setup are important to get the intended feel and performance

Need help choosing?

If you are deciding between cartridge options or want guidance on setup targets for your use case, share your bike details and how you ride and we can help narrow down the right direction.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKR102
Model # TTX25S
Barcode # FKR102
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Type Code TTX25S
Stroke Metal to Metal (mm) 120.0
Product Family FKR 100
Notes Comes with 3 different spring rates: 9.5, 10 & 10.5N/mm Fits KYB Fork
Fitted Spring Sold separately. See notes.
Rec. Ohlins Oil 01309-

More From This Category