The Ohlins YA429 is a rear STX 46 Street shock developed for riders who want more control and consistency from the Yamaha Tracer 7 platform. It is built around a gas-pressurised, oil/gas separated damping system to help maintain stable performance as conditions and pace change. With external adjustments for rebound and preload, it allows practical tuning without over-complicating the setup.

Ohlins | Made to race, perfected to ride

Ohlins road shocks draw on the same damping principles used in competition, refined for real-world riding. The focus is predictable chassis behaviour, clear feedback, and damping that stays consistent over longer rides. This makes it easier to carry speed smoothly and keep the bike composed when the road surface is less than perfect.

Who this shock is for

  • Riders who use their Tracer 7 GT / Tracer 700 / Tracer 7 (FJ-07) on the street and want improved control and feel.
  • Owners who carry a passenger or luggage and need a more supportive, tuneable rear end.
  • Anyone chasing better stability under braking and through corner exits, with the ability to fine-tune rebound.

Shock design & features

This is an STX 46 Street rear mono shock using a gas-pressurised, oil/gas separated architecture to reduce fade and keep damping behaviour stable. The design is intended to provide controlled traction and predictable support across typical road speeds and loads.

Tuning controls

  • Rebound damping adjustment to balance grip, control and ride feel.
  • Spring preload adjustment to set ride height and support for rider weight, passenger and luggage.

Before you install

  • Check sag and preload after installation, then use rebound adjustment to control how quickly the rear returns after bumps and corner loads.
  • If your fork setup is far from standard, plan to balance the bike front-to-rear after fitting the shock.
  • Inspect linkage bearings and mounting hardware condition during fitment to ensure the shock can work as intended.

Serviceability / lifecycle

This Ohlins unit is a serviceable performance shock designed to be maintained over its working life. Periodic servicing helps keep damping consistent and extends component life, particularly if the bike sees regular hard use or wet/dirty conditions.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU YA429
Model # S46DR1S
Barcode # YA429
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.300 x 0.300 x 0.500m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear Mono
Shock Length Eye to Eye (mm) 330.0
Spring Rate Standard 120.0 N/mm
Type Code S46DR1S
Stroke Metal to Metal (mm) 64.0
Product Family STX 46 Street
Fitted Spring 01095-44
Spring Colour Yellow
Rec. Ohlins Oil 01309-

More From This Category