The Tractive X-TREME Shock for the BMW HP2 Enduro is a closed, pressurised rear shock designed to deliver consistent damping by separating the gas from the oil. This architecture helps reduce aeration and fade during sustained, demanding use. The unit is supplied with external adjustment controls to tune the ride to load, terrain and preference.

Design & features

  • Closed, pressurised shock design with separated oil and gas for more consistent damping
  • Remote reservoir (hose-mounted) configuration
  • Built for repeatable performance in mixed on- and off-road conditions

Tuning Controls

  • Triple-adjustable damping: rebound, compression, and a separate compression range for higher-speed shaft movements
  • Hydraulic preload adjuster for convenient spring preload changes without tools

Base Setup (factory preset)

This shock is supplied with a factory baseline setting intended to be a safe starting point. Fine-tuning may be required based on rider mass, luggage, and typical terrain.

Before You Install

  • Confirm fitment for your exact BMW HP2 Enduro variant and year
  • Check hose routing and clearance for the remote reservoir location
  • Set sag and preload first, then adjust damping to suit your riding conditions

Serviceability/Lifecycle

As a pressurised shock with separated oil and gas, this unit is designed to be serviceable to maintain performance over time. Regular inspection and periodic servicing are recommended, especially if used in harsh or dusty conditions.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM05-T5143-TR
Model # 46BM05-T5143-TR
Barcode # 46BM05T5143TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 416.0
Spring Rate Standard 80 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 107.0
Notes PDSII anti-bottoming
Fitted Spring 80-235

More From This Category