The Tractive X-TREME rear shock for the Ducati DesertX Rally uses a closed, pressurised damper architecture to keep the oil and gas separated for more consistent damping in demanding conditions. This model is built around a 46 mm shock body and includes a remote reservoir. Adjustment is provided for compression and rebound damping.

Design & features

  • Closed, pressurised design that separates oil and gas for consistent performance over long, rough rides
  • Remote reservoir layout to support stable damping under heat load
  • 46 mm shock body architecture
  • Supplied with a spring fitted

Tuning Controls

  • Compression damping adjustment
  • Rebound damping adjustment

Who is this for?

  • DesertX Rally riders wanting broader damping control for mixed terrain riding
  • Riders who tune suspension for load changes, pace changes, or varying surfaces

Before You Install

  • Confirm fitment for your exact DesertX Rally model and year before installation
  • Plan access and mounting for the remote reservoir and hose routing during installation
  • Set rider sag and baseline damping after installation to suit your weight, load, and typical terrain

Serviceability/Lifecycle

  • Pressurised shocks are serviceable and should be maintained periodically to keep damping consistent
  • Inspect the reservoir hose routing and mounting points during routine checks

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46DU24-T5511-TR
Model # 46DU24-T5511-TR
Barcode # 46DU24T5511TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 366.0
Spring Rate Standard 85 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 102
Notes PDSII anti-bottoming
Fitted Spring 85-205

More From This Category