The Tractive X-CITE shock for the BMW F 800 GS is a closed, pressurised monotube design that keeps the damping oil and gas separated for consistent control across changing conditions. Built around a sealed cartridge architecture, it’s designed for stable damping behaviour and straightforward set-up. This model is configured with rebound adjustment to tune ride feel to load and terrain.

Design & features

  • Closed, pressurised construction with oil/gas separation to help maintain consistent damping.
  • Sealed cartridge-style internal architecture intended to support stable performance over long rides.
  • Designed as a direct-fit replacement shock for the BMW F 800 GS application listed.

Tuning Controls

  • Rebound damping adjustment to fine-tune how quickly the shock extends after a bump and to balance comfort vs control.

Base Setup (factory preset)

This shock is supplied with a baseline set-up from Tractive. Final feel depends on rider mass, luggage and typical road surface, so minor rebound changes may be used to dial-in stability and compliance.

Before You Install

  • Confirm compatibility for your exact BMW F 800 GS variant and year before installation.
  • Inspect mounting hardware and bushes during fitment and replace any worn components as needed.
  • After installation, re-check fastener torque and confirm free movement through suspension travel.

Serviceability/Lifecycle

As a sealed, pressurised shock, servicing should be carried out by a qualified suspension technician with the correct equipment. Periodic inspection for leaks and consistent damping feel helps determine when service is due.

Is It Right For You?

This configuration suits BMW F 800 GS riders who want a quality pressurised shock with external rebound adjustment for fine-tuning to different loads and riding conditions without adding extra adjustment complexity.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM08-R3307-TR
Model # 46BM08-R3307-TR
Barcode # 46BM08R3307TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 428.0
Spring Rate Standard 170 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 79.0
Fitted Spring 170-205

You May Also Like

More From This Category