The Tractive X-CITE rear shock for the BMW R nineT Urban G/S uses a closed, pressurised design to keep damping consistent and reduce foaming under use. This unit features a gas/oil separation piston layout rather than an emulsion build. It is configured with external rebound adjustment.

Design & features

  • Closed, pressurised shock construction for stable damping behaviour
  • Gas/oil separation piston design (not emulsion)
  • Remote reservoir connected via hose
  • Supplied as a sprung rear shock unit

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

Damping and spring settings are supplied pre-set from Tractive. Fine-tuning is typically done by adjusting rebound to suit load, tyres, and riding conditions.

Before You Install

  • Confirm fitment for your exact BMW R nineT Urban G/S variant and year
  • Check clearance and routing for the hose-mounted reservoir before final tightening
  • Set sag and confirm all fasteners are torqued to the motorcycle manufacturer’s specifications

Serviceability/Lifecycle

As a pressurised shock with separated gas and oil, this unit is designed to be serviced to maintain performance over time. Periodic inspection for leaks, bushing wear, and reservoir hose condition will help ensure long-term reliability.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM16-R3342-TR-01
Model # 46BM16-R3342-TR-01
Barcode # 46BM16R3342TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Raised +40
Shock Length Eye to Eye (mm) 386.0
Spring Rate Standard 140 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 67
Fitted Spring 140-180

More From This Category