The Tractive X-PERIENCE rear shock for the BMW R nineT Urban G/S 40 Years GS uses a closed, pressurised architecture with separated oil and gas to keep damping consistent over varying conditions. The design is built around a piston-separated system rather than an emulsion layout, helping maintain control during longer rides. This unit includes external damping adjustment for both compression and rebound, along with a spring preload adjuster.

Design & features

  • Closed, pressurised shock design with oil/gas separation via an internal piston
  • Aimed at consistent damping feel through sustained use
  • Coil spring with an integrated hydraulic preload adjuster

Tuning Controls

  • Compression damping adjustment
  • Rebound damping adjustment
  • Hydraulic spring preload adjustment

Base Setup (factory preset)

This shock is supplied with a baseline factory tune intended as a starting point. Use the external adjusters to refine feel based on load, road surface, and riding priorities.

Who is this for?

  • Riders who want wider tuning range with both compression and rebound adjustment
  • Owners who regularly change load (solo, luggage) and want convenient hydraulic preload changes
  • BMW R nineT Urban G/S 40 Years GS riders seeking consistent damping on longer rides

Before You Install

  • Confirm model fitment for BMW R nineT Urban G/S 40 Years GS
  • Set sag and preload for your typical riding load before fine-tuning damping
  • If you frequently swap between solo and loaded riding, note your preferred preload and damping positions for repeatability

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM21-T4333-TR-01
Model # 46BM21-T4333-TR-01
Barcode # 46BM21T4333TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-PERIENCE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 373.0
Spring Rate Standard 140 N/mm
Type Code X-PERIENCE
Stroke Metal to Metal (mm) 54.0
Fitted Spring 140-180

You May Also Like

More From This Category