The Tractive X-CITE shock for Ducati Scrambler is a replacement rear shock built around a closed, pressurised damper for consistent control and reduced aeration under hard use. This unit uses an oil/gas separation piston design rather than an emulsion layout. The configuration for this model includes rebound adjustment to fine-tune how quickly the shock extends after a bump.

Who is this for?

  • Riders who want more control and consistency from the rear suspension across mixed road conditions
  • Owners who prefer a shock with external rebound adjustability for ride feel tuning
  • Scrambler riders looking for a serviceable, performance-focused shock architecture

Design & features

  • Closed, pressurised shock design to help maintain damping consistency
  • Oil and gas separation piston construction (not emulsion) to reduce foaming and damping fade
  • Coil spring-equipped shock assembly

Tuning Controls

  • Rebound damping adjustment

Before You Install

  • Confirm compatibility with your exact Ducati Scrambler variant and year
  • Inspect linkage and mounting hardware condition during installation
  • Set rider sag and rebound to suit your load, tyre choice, and typical road surface

Serviceability/Lifecycle

  • Serviceable shock design intended for periodic maintenance to keep performance consistent over time
  • Keeping the unit clean around seals and adjusters helps support long-term reliability

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 38DU15-R1101-TR
Model # 38DU15-R1101-TR
Barcode # 38DU15R1101TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 296.0
Spring Rate Standard 110 N/mm
Spring Free Length (mm) 145
Type Code X-CITE
Stroke Metal to Metal (mm) 49.5
Fitted Spring 110-145
Suspension Unit Type Shock
Piston Diameter (mm) 38
Spring Type Linear, included
Preload Adjustment Mechanical
Spring Preload Setting 12
Rebound Adjuster Position 10 (180 deg)
Damping System Emulsion oil/gas

More From This Category