The Tractive X-CITE Shock for the CFMOTO 450 MT is a closed, pressurised damper built around a sealed cartridge design for consistent oil control and stable damping. It uses an internal separation piston to keep the gas and oil separated during operation. This model includes a spring and retains the motorcycle’s standard ride height.

Design & features

  • Closed, pressurised construction for more consistent damping over varying conditions.
  • Sealed cartridge architecture to maintain oil control and reduce aeration.
  • Oil/gas separation via an internal separation piston (not an emulsion design).
  • Supplied with a spring.

Tuning Controls

  • Rebound damping adjustment.

Base Setup (factory preset)

The shock is supplied with a baseline setting intended to be a practical starting point for general riding. Final tuning will depend on load, tyres, and typical surfaces.

Who is this for?

  • Riders who want a serviceable, pressurised rear shock with external rebound control.
  • Owners who regularly change load (solo vs luggage) and want a damper that can be tuned to suit.

Before You Install

  • Confirm your exact model and year compatibility for the CFMOTO 450 MT before fitting.
  • Check spring rate suitability for your typical riding weight and luggage/passenger use.
  • After installation, set sag and then fine-tune rebound to match your conditions.

Serviceability/Lifecycle

This is a serviceable, pressurised shock designed to be maintained over its lifecycle. Regular servicing helps keep damping consistent and internal components in good condition.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46CF24-R2302-TR
Model # 46CF24-R2302-TR
Barcode # 46CF24R2302TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Shock Length Eye to Eye (mm) 358
Length Change (mm) Raised +25mm
Spring Rate Standard 95 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 90
Notes PDSII anti-bottoming
Fitted Spring 95-180

More From This Category