The TracTive X-TREME Shock for Ducati Multistrada V4 is a closed, pressurised rear shock designed to deliver consistent damping under changing loads and temperatures. This model uses a gas-separated internal layout rather than an emulsion design, helping reduce aeration for more stable feel over long rides. It includes a remote reservoir, supporting reliable damping performance when conditions get demanding.

Design & features

  • Closed, pressurised monotube shock architecture
  • Oil/gas separation via internal separation piston (non-emulsion)
  • Remote reservoir (hose-mounted) to support consistent damping
  • Supplied with a spring

Tuning Controls

  • Triple adjustment: rebound damping, compression damping, and a separate additional damping adjustment circuit

Before You Install

  • Confirm model fitment for your Ducati Multistrada V4 variant and year before installation.
  • Set sag and baseline damping to suit rider weight, typical load, and intended use.

Serviceability/Lifecycle

  • Pressurised, gas-separated shocks are designed to be serviced to maintain consistent performance over time.
  • Periodic inspection and servicing helps keep damping behaviour predictable as oil and seals age.

Is It Right For You?

  • Suitable for riders who want broad tuning range and independent control over multiple damping behaviours.
  • A good match if your Multistrada V4 sees varied road conditions and loads where stable, repeatable damping is a priority.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46DU21-T5510-TR
Model # 46DU21-T5510-TR
Barcode # 46DU21T5510TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -25
Shock Length Eye to Eye (mm) 373.0
Spring Rate Standard 130 N/mm
Spring Option -2 110-180
Spring Option +1 140-180
Spring Option -1 120-180
Spring Option +2 150-180
Manufacturer Note 1 Side and/or center stand might be too long
Damping Feature PDSII anti-bottoming
Damping System Separated oil/gas with reservoir
Rebound Adjuster Position 10 (180 deg)
Low-speed Compression Adjuster Position 9
High-speed Compression Adjuster Position 10
Spring Preload Setting 15 +12/-3
Preload Adjustment Hydraulic, with knob
Spring Type Linear, included
Piston Diameter (mm) 46
Suspension Unit Type Shock
Fitted Spring 130-180
Notes PDSII anti-bottoming
Stroke Metal to Metal (mm) 55.0
Type Code X-TREME

More From This Category