The Tractive X-CITE Shock for Honda NC750S is a closed, pressurised monotube shock built around a sealed cartridge design to keep damping consistent over long rides. It replaces the complete rear shock unit and is intended to provide controlled, repeatable behaviour across a wide range of road conditions. This model includes external rebound adjustment for tailoring ride response to load and surface changes.

Design & features

  • Closed, pressurised construction to help maintain stable damping and reduce aeration under sustained use
  • Sealed cartridge architecture for consistent oil control and repeatable performance
  • 46 mm shock format as indicated by the model identifier

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

Supplied with a factory baseline tune intended as a safe starting point. Final settings should be adjusted to suit rider weight, typical load and preferred ride feel.

Before You Install

  • Confirm correct fitment for your exact NC750S variant and year range before installation
  • Inspect linkage bearings and mounting hardware condition during the swap to avoid masking handling issues
  • After installation, set sag and then fine-tune rebound to match your load and riding conditions

Serviceability/Lifecycle

The sealed, pressurised design is intended to support consistent operation over time. Periodic inspection and servicing by a qualified suspension technician helps maintain damping quality and reliability.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO14-R1108-TR
Model # 46HO14-R1108-TR
Barcode # 46HO14R1108TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Standard Height
Spring Rate Standard 140 N/mm
Type Code X-CITE
Fitted Spring 140-160
Suspension Unit Type Shock
Piston Diameter (mm) 46
Spring Type Linear, included
Preload Adjustment Mechanical
Damping System Emulsion oil/gas
Spring Option +2 160-160
Spring Option -1 130-160
Spring Option +1 150-160
Spring Option -2 120-160

More From This Category