The Tractive X-CITE Shock for the Honda NC750X is a closed, pressurised rear shock built around a sealed cartridge design to maintain consistent damping and reduce oil aeration. This configuration is intended to provide stable control across changing road conditions and sustained use. The unit includes external adjustment to tailor ride behaviour to your load and riding style.

Design & features

  • Closed, pressurised shock architecture to help keep damping consistent under repeated use.
  • Sealed cartridge layout to separate and stabilise the damping circuit.
  • Single body design without an external reservoir specified for this model.

Tuning Controls

  • Rebound damping adjustment for controlling return speed after bumps and weight transfer events.

Base Setup (factory preset)

This shock is supplied with a standard internal valving baseline intended as a starting point. Fine-tuning is completed using the external rebound adjuster to suit rider preference and typical load.

Who is this for?

  • NC750X riders looking for a serviceable, pressurised shock design with external rebound adjustment.
  • Riders who want a stable damping platform for everyday commuting, weekend riding, and variable road surfaces.

Before You Install

  • Confirm fitment to your exact Honda NC750X variant and year prior to installation.
  • Plan to set sag and verify clearances after installation.
  • If you are unsure about compatibility or setup, consult a qualified suspension technician.

Serviceability/Lifecycle

As a sealed, pressurised shock, the damping system is designed to be maintained through periodic servicing to keep oil condition and internal sealing performance consistent over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO14-R1506-TR
Model # 46HO14-R1506-TR
Barcode # 46HO14R1506TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 312.0
Spring Rate Standard 140 N/mm
Spring Option -2 120-145
Spring Option +1 150-145
Spring Option -1 130-145
Spring Option +2 160-145
Damping System Emulsion oil/gas
Rebound Adjuster Position 10 (270 deg)
Spring Preload Setting 13 +10/-5
Preload Adjustment Hydraulic, with knob
Spring Type Linear, included
Piston Diameter (mm) 46
Suspension Unit Type Shock
Fitted Spring 140-145
Stroke Metal to Metal (mm) 63.0
Type Code X-CITE

More From This Category