The Tractive X-CITE shock for the Honda NC750S is a closed, pressurised rear shock built around a sealed cartridge architecture to maintain consistent damping and reduce aeration in demanding use. It is designed as a direct-fit replacement unit and is configured with external adjustment for fine-tuning. No height change information is provided in the supplied data.

Design & features

  • Closed, pressurised design with a sealed cartridge for stable damping performance.
  • Oil and gas are separated via an internal separation piston (not an emulsion layout).
  • Built for the Honda NC750S application listed in the product name.

Tuning Controls

  • Rebound damping adjustment.
  • Spring preload adjustment.

Base Setup (factory preset)

Factory settings and baseline tune details are not included in the provided product data. Final setup should be confirmed during installation based on rider load and intended use.

Before You Install

  • Confirm model fitment for your exact Honda NC750S and year range using your motorcycle details and the product listing reference.
  • Inspect linkage and mounting hardware condition before fitting a new shock.

Serviceability/Lifecycle

Service intervals, rebuildability details, and parts availability are not specified in the supplied data. As a pressurised sealed-cartridge shock, correct servicing requires appropriate tools and procedures.

Need Help Choosing?

If you are unsure whether this configuration matches your needs (or you require a specific spring rate or setup), provide your NC750S model year and typical load so the correct configuration can be confirmed.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO14-R1508-TR
Model # 46HO14-R1508-TR
Barcode # 46HO14R1508TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Spring Rate Standard 140 N/mm
Type Code X-CITE
Fitted Spring 140-145

More From This Category