The TracTive X-TREME shock for the KTM 890 ADVENTURE R is a closed, pressurised rear shock built around a sealed internal cartridge. This architecture keeps the damping oil separated from the gas charge for more consistent performance across changing conditions. This model is supplied in a standard-height configuration.

Design & features

  • Closed, pressurised design with oil/gas separation to help maintain stable damping behaviour
  • Sealed cartridge architecture to support consistent control over long, varied rides
  • Built as a dedicated fitment for the KTM 890 ADVENTURE R

Tuning Controls

  • Triple adjustment: independent tuning for compression and rebound, with an additional compression circuit for broader damping control
  • Hydraulic preload adjuster (HPA) for convenient spring preload changes

Who is this for?

  • Riders who want a rear shock with wide external adjustment range for mixed on-road and off-road use
  • Owners who change load regularly (luggage/passenger) and want easier preload changes via HPA

Before You Install

  • Confirm the shock is intended for the KTM 890 ADVENTURE R and matches your desired standard-height setup
  • Set rider sag and preload first, then fine-tune damping adjustments methodically
  • Inspect linkage and mounting hardware condition during installation

Serviceability/Lifecycle

  • Closed, pressurised shock design is intended to be serviceable as part of routine suspension maintenance
  • Periodic inspection and servicing helps maintain consistent damping and seal performance over time

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46KT19-T5341-TR-01
Model # 46KT19-T5341-TR-01
Barcode # 46KT19T5341TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Shock Length Eye to Eye (mm) 380
Length Change (mm) Standard Height
Spring Rate Standard 95 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 91
Notes PDSII anti-bottoming
Fitted Spring 95-205

More From This Category