The Tractive X-CITE shock for the Triumph 1200 Explorer is a closed, pressurised shock built around a sealed internal cartridge to keep damping consistent over changing conditions. This unit is configured with rebound adjustment to fine-tune chassis behaviour for your load and riding style. It is a direct-fit replacement shock for the model listed, with no height change specified in the provided data.

Who is this for?

  • Riders who want a serviceable, engineered rear shock with external rebound adjustment.
  • Owners who regularly change load (solo, luggage, passenger) and want predictable control after setup.
  • Touring and everyday riders prioritising damping consistency from a sealed, pressurised design.

Design & features

  • Closed, pressurised shock architecture with a sealed cartridge to reduce aeration and help maintain stable damping.
  • Oil and gas are separated by a piston (non-emulsion design).
  • Coil-sprung shock configuration (spring included by type-code decoding).

Tuning Controls

  • Rebound damping adjustment.

Base Setup (factory preset)

The shock is supplied with a baseline factory setting intended to be a workable starting point. Fine-tuning rebound is typically done after setting sag and confirming tyre pressures and load.

Serviceability/Lifecycle

The sealed, pressurised construction is designed for consistent performance and is intended to be serviceable as part of normal suspension maintenance. Service intervals and procedures are not specified in the provided data.

Before You Install

  • Confirm fitment for the Triumph 1200 Explorer as listed.
  • Inspect linkage, bearings, and mounting hardware condition before installation.
  • No ride-height change information is provided; if ride height is critical for your use, verify prior to fitting.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46TR12-R3303-TR
Model # 46TR12-R3303-TR
Barcode # 46TR12R3303TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 374.0
Spring Rate Standard 130 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 75.0
Fitted Spring 130-205

More From This Category