The Tractive X-CITE shock for Yamaha Tracer 900 (GT) uses a closed, pressurised damper design that keeps the oil and gas separated for more consistent damping over a wide range of riding conditions. This unit is a 46 mm shock architecture and is configured with rebound adjustment. No height change information is provided in the supplied data.

Design & features

  • Closed, pressurised shock design with separated oil and gas to help maintain stable damping behaviour.
  • 46 mm shock platform (as indicated by the product’s type code).

Tuning Controls

  • Rebound damping adjustment (as indicated by the product’s type code).
  • No compression or electronic adjustment details are provided in the supplied data.

Before You Install

  • Confirm your exact model and fitment for the Yamaha Tracer 900 (GT) prior to installation.
  • No spring, reservoir style, or ride-height change details are provided in the supplied data—check these points if they are critical to your setup.

Is It Right For You?

  • Suitable if you want a Tractive rear shock solution for the Tracer 900 (GT) with external rebound adjustment.
  • If you require compression adjustability, electronic control, or verified ride-height change, this listing does not provide that information.

Serviceability/Lifecycle

  • Closed, pressurised designs are intended to deliver consistent performance by maintaining gas pressure and fluid separation.
  • No service interval or rebuild details are provided in the supplied data.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46YA15-R3109-TR-01
Model # 46YA15-R3109-TR-01
Barcode # 46YA15R3109TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 330.0
Spring Rate Standard 90 N/mm
Spring Option -2 80-180
Spring Option +1 95-180
Spring Option -1 85-180
Spring Option +2 100-180
Damping System Separated oil/gas
Rebound Adjuster Position 10
Spring Preload Setting 16
Preload Adjustment Mechanical
Spring Type Linear, included
Piston Diameter (mm) 46
Suspension Unit Type Shock
Fitted Spring 90-180
Stroke Metal to Metal (mm) 66.0
Type Code X-CITE

More From This Category