The Tractive X-TREME shock for the Yamaha Tenere 700 Extreme uses a closed, pressurised damper design with separated oil and gas to keep damping consistent. It is built around a 46 mm shock platform and uses a remote reservoir architecture. This configuration is intended to maintain control and feel across changing conditions without relying on an emulsion layout.

Design & features

  • Closed, pressurised construction with oil/gas separation to reduce aeration and help maintain stable damping.
  • Remote reservoir design to support consistent performance during extended use.
  • 46 mm shock format as the foundation for the damper assembly.

Tuning Controls

  • Triple adjustable damping: rebound plus both compression circuits (high-speed and low-speed).

Is It Right For You?

  • Riders who want broad adjustability to tune the Tenere 700 Extreme for load, terrain and riding style.
  • Those looking for a separated oil/gas shock architecture rather than an emulsion-type design.

Before You Install

  • Confirm model compatibility for your Yamaha Tenere 700 Extreme and check clearance/hosing routing requirements for the remote reservoir.
  • Plan your setup so you can return to a known baseline after making tuning changes.

Serviceability/Lifecycle

  • Serviceable shock design intended for periodic maintenance to keep damping performance consistent over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46YA22-T5521-TR-01
Model # 46YA22-T5521-TR-01
Barcode # 46YA22T5521TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 385.0
Spring Rate Standard 80 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 102.0
Notes PDSII anti-bottoming
Fitted Spring 80-235

More From This Category