The Ohlins FKS227 NIX 22 fork cartridge kit is developed to improve front-end feel and stability on the Honda CBR500R. It focuses on more controlled damping and clearer feedback at the tyre contact patch, especially under braking and through mid-corner load changes. Adjustment is provided to help tailor the fork response to your riding style and conditions.

Ohlins | Made to race, perfected to ride

Ohlins cartridge kits are built around consistent damping control and predictable support. The aim is improved confidence through better communication from the front end, without compromising everyday rideability.

Who this cartridge kit is for

  • CBR500R riders wanting improved braking stability and front-end feedback
  • Street riders looking for better control through corners
  • Occasional track-day riders who want more precise front suspension tuning

Shock design & features

  • NIX 22 fork cartridge kit for the front fork
  • Premium internal components aimed at consistent performance and durability
  • Designed to improve mid-corner feel and stability under braking

Tuning controls

  • Separate compression and rebound damping adjustments for fine-tuning

Is it right for you?

If you want more stable braking behaviour and clearer feedback at the bars, this kit is a suitable option. Riders who prefer a simple, fixed setup with no adjusters may not need the added tuning range.

Before you install

This is an internal fork cartridge upgrade and should be installed and set up by a qualified suspension technician. A correct baseline setup is important to get the intended control and feel.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKS227
Model # NIX 22
Barcode # FKS227
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 22
Stroke Metal to Metal (mm) 120.0
Product Family NIX 22
Notes Spring series 08429-xx
Fitted Spring Sold separately. See notes.
Rec. Ohlins Oil 01309-

More From This Category