The Tractive X-CITE rear shock for the BMW F 750 GS uses a closed, pressurised design to keep the damping oil and gas stable during use. It’s built around a sealed cartridge architecture, helping deliver consistent response across changing conditions. This model includes external rebound adjustment, with the spring fitted to suit the application.

Design & features

  • Closed, pressurised shock design for stable damping behaviour
  • Sealed cartridge construction to support consistency and durability
  • Spring-equipped unit

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

Supplied with a factory baseline tune intended to suit general road and mixed-surface riding. Final setup should be confirmed for your load, tyres, and typical riding conditions.

Before You Install

  • Confirm compatibility with your exact BMW F 750 GS variant and model year
  • Inspect linkage and mounting hardware for wear before fitting
  • After installation, set sag and then fine-tune rebound to match your riding and load

Serviceability/Lifecycle

As a pressurised, sealed-cartridge shock, routine servicing helps maintain damping consistency over time. Service intervals depend on use and conditions.

Is It Right For You?

Choose this option if you want a quality rear shock with rebound adjustment and a pressurised design aimed at consistent damping performance. If you need additional adjusters beyond rebound, you’ll want a different configuration.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM18-R3502-TR
Model # 46BM18-R3502-TR
Barcode # 46BM18R3502TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -30
Shock Length Eye to Eye (mm) 371.0
Shock Length Eye to Eye (mm) 371
Spring Rate Standard 150 N/mm
Spring Free Length (mm) 180
Type Code X-CITE
Stroke Metal to Metal (mm) 62.0
Fitted Spring 150-180

You May Also Like

More From This Category